PTFE, FEP, PFA, PVDF Residual Material Vacuum Rake Dryer

• Movement Way: Fixed
• Flow: Cross Flow
• Heating Mode: Transmission
• Material Status: Powder
• Drying Medium: Air
• Operational Method: Continuous
• Model NO.: ZPG
• Type: Continuous Vacuum
• Transport Package: Standard Wood Package
• Trademark: XINGGAN
• Origin: Changzhou, China
• HS Code: 8419399090

Product Description

INTRODUCTION
ZPG vacuum rake dryer uses large areas of layers to do heat, thus enable large heat transfer area and high thermal efficiency. Stirring is set so that the materials in the barrel form a state of continuous circulation, further improving the uniformity of the material being heated, allowing smooth drying of pasty, creamy and mushy materials.

WORKING PRINCIPLE
ZPG vacuum rake dryer is a new kind of horizontal batch vacuum drying equipment. The wet materials experience conduction and evaporation. Blade stirrer continuously removes materials from hot surface, and develops a recycle stream in the container. After evaporation, the water is withdrawn from the vacuum pump.

FEATURES
This machine uses large areas of layers to do heat, thus enable large heat transfer area and high thermal efficiency.
Stirring is set so that the materials in the barrel form a state of continuous circulation, further improving the uniformity of the material being heated.
Stirring is set, allowing smooth drying of pasty, creamy and mushy materials.

APPLICAITON
In industries of medicine, food and chemical, it is used to dry following materials.
Applied in pasty and powdery materials.
Heat-sensitive materials requiring low-temperature drying.
Easily oxidized, explosive, strong-irritant and highly-toxic materials.

TECHNICAL PARAMETERS

Item\Model	ZPG-500	ZPG-750	ZPG-1000	ZPG-1500	ZPG-2000	ZPG-3000
Working Volume (L)	300	450	600	900	1200	1800
Heating Area (m^2)	6	7.6	9.3	12.3	14.6	19.3
Stirring Revolution (rpm)	6-30 stepless speed regulation
Power (kw)	4	5.5	5.5	7.5	11	15
Design pressure of Jacket (hot water))	≤0.3
Vacuum Degree(inside cylinder)	-0.09~0.096

Note: The evaporated amount of water is related to the characteristics of raw materials and the temperature of inlet air and outlet air. When the temperature of the outlet air is 90ºC, the water evaporated curve is listed in above table (for reference only). If the product have been improved or updated by new technology, the related parameters will be changed accordingly.

STRUCTURE SCHEMATIC